![[Tutorial] TeamViewer 14 on Nvidia Jetson TX2](https://i0.wp.com/www.myzhar.com/blog/wp-content/uploads/2019/01/teamviewer-tx2.png?resize=863%2C300&ssl=1 "#caption6")
![[Review] See3CAM_CU30 – 3.4 MP Low Light USB Camera Board (Color)](https://i0.wp.com/www.myzhar.com/blog/wp-content/uploads/2018/07/20180709_221639-e1531167931338.jpg?resize=863%2C300&ssl=1 "#caption7")
|
MyzharBot is an open source and open hardware robotic platform born to study sensor fusion algorithms for autonomous navigation [READ MODE] On the website, you can find also tutorials about Coding, Computer Vision, Artificial Intelligence, Electronics, 3D Printing, and all the technologies that rock around Robotics. |
|
RoboController board is on the crowdfunding platform Technofunding
The RoboController is a board designed to perform the function of advanced motor control in all those applications where you need a RealTime control of two DC motors with encoder feedback and the capabilities of communication with a control unit which can be higher than a personal computer.
Starting from today, December 29th 2013, all the code written for MyzharBot (particularly to control the RoboController card and to communicate with it) will be available on the Github versioning platform. Everyone that want to contribute to the project can fork the repository and make a pull request to propose…
I published on YouTube two new videos about the unboxing of the chassis of MyzharBot v3.1 and about the first test of assembling to verify if alla the measures were correct. Everything is fine!!! You can find the video in the Videos page
Yesterday evening I received the pack from Vectorealism with the new lasercut pieces of the chassis for MyzharBot v3.1. As test I chose wood as material, but it is perfect and I am ready to realize the plastic chassis. Following a few raw photos of the materials A video with the…
