![[Tutorial] TeamViewer 14 on Nvidia Jetson TX2](https://i0.wp.com/www.myzhar.com/blog/wp-content/uploads/2019/01/teamviewer-tx2.png?resize=863%2C300&ssl=1 "#caption6")
![[Review] See3CAM_CU30 – 3.4 MP Low Light USB Camera Board (Color)](https://i0.wp.com/www.myzhar.com/blog/wp-content/uploads/2018/07/20180709_221639-e1531167931338.jpg?resize=863%2C300&ssl=1 "#caption7")
|
MyzharBot is an open source and open hardware robotic platform born to study sensor fusion algorithms for autonomous navigation [READ MODE] On the website, you can find also tutorials about Coding, Computer Vision, Artificial Intelligence, Electronics, 3D Printing, and all the technologies that rock around Robotics. |
|
It’s official: MyzharBot will be present at European Maker Faire in Rome since 3rd to 5th October. MyzharBot will not be alone, it will be accompanied by many of the other robots from “Officine Robotiche” that already have accompanied him to the event “Officine Robotiche 2014“. From Maker Faire website: The Maker…
In a few days MyzharBot will receive the PCB of the Power Distribution Board. Meanwhile I published the full diagram of the power connection of the different modules of the robot.
Finally, the Video Server is working using Multicast UDP protocol. There is no more limit to the number of clients that can connect to server, each client must only start binding to the correct port and can start to receive the frames asyncronously. I tested the code of the SDK…
On the wave of the success of the funding campaign on TakeOff Crowdfunding, MyzharBot is now waiting for its new board: the Power Distribution v1.0. The Power Distribution board joins the two prototypes visibile on the rear of MyzharBot into one single board providing both protection to power inversion and…
