Asus Xtion Pro Live is mounted in the front of MyzharBot using a 3D printed support. The support has been designed by wlemkens and published on MakerBot Thingiverse.
[wpfilebase tag=file id=16 /]
The support has been realized by the 3D service from Katodo.com
Katodo
The support can be fixed on the top basis of MyzharBot using five M6 nuts and bolts as illustrated in the following photo gallery
3D printed Asus Xtion support
3D printed Asus Xtion support
3D printed Asus Xtion support
3D printed Asus Xtion support
3D printed Asus Xtion support
Before tightening the nuts and bolts
Nuts and bolts tightened
Asus Xtion ready to work
