The new chassis is almost ready… motors and mechanics of the tracks are still missing, but the impact of the black colour is really good.
It’s been a long war… but finally I did it. My development PC with Xubuntu 13.10 is finally correctly configured and now it is cross-compiling Qt5.2.1 for the Pandaboard ES running Ubuntu Core 12.04… just one night of waiting. The whole procedure for the preparation of the operating system and…
Until now I tested the SDK network communication between MyzharBot and the remote client using a single socket connection over TCP protocol. This can be enough if the messages exchanged are few, but when the system will be complete there will be a lot of messages to be exchanged: Control…
MyzharBot is growing up… waiting for the arrival of the new plastic chassis, it is time to go on with the software.
Adafruit Industries has promoted in the last few weeks a contest about the utilization of the Beaglebone Black board in a personal project. With a post on Google+ about the future utilization of the Beaglebone Black board to run the TCP/UDP server that will handle the communication between the remote user device…
RoboController board is on the crowdfunding platform Technofunding
The RoboController is a board designed to perform the function of advanced motor control in all those applications where you need a RealTime control of two DC motors with encoder feedback and the capabilities of communication with a control unit which can be higher than a personal computer.
Starting from today, December 29th 2013, all the code written for MyzharBot (particularly to control the RoboController card and to communicate with it) will be available on the Github versioning platform. Everyone that want to contribute to the project can fork the repository and make a pull request to propose…
I published on YouTube two new videos about the unboxing of the chassis of MyzharBot v3.1 and about the first test of assembling to verify if alla the measures were correct. Everything is fine!!! You can find the video in the Videos page
Yesterday evening I received the pack from Vectorealism with the new lasercut pieces of the chassis for MyzharBot v3.1. As test I chose wood as material, but it is perfect and I am ready to realize the plastic chassis. Following a few raw photos of the materials A video with the…
